Alat Pengujian
Leeb Hardness Tester TIME
Rp 28.991.807
Measuring range : (170-960)HLD (17.9-69.5)HRC Hardness scale : HL, HB, HRA, HRB, HRC, HV, HS Measuring direction : 360° Tolerance : ±6HLD(when
Hardness Tester TIME®
Rp 28.781.080
Impact device : G type Impact energy : 90mJ Work mode : Used single or system mode Display : OLED screen, 128x64 dot matrix, brightness adjustable Measuring range :
Shore D Hardness Tester T
Rp 12.900.000
Test scale available : Shore D Standards : DIN53505, ASTMD2240, ISO 7619, JIS K7215 Display : Hardness result, Average value, Max.value(Peak value lock), Battery
Surface Roughness Tester
Rp 34.567.154
Measuring system : Metric, imperial Display resolution : 0.001 μ m Data output : RS232 Pickup measuring range :
Surface Roughness Tester
Rp 140.940.331
Assessed profile : R (Roughness), W (Waveness), P (Primary profile) Measuring range : ±400µm, ±25µm Filtering : RC,PCRC,Gauss,D-P,ISO
Measuring Platform TA630
Rp 18.182.327
X-axial range:±12.5mm Y-axial range:±12.5mm Rotation: coarse adjustment 360º, fine adjustment ±5º Pitching: 0º ~
Ultrasonic Thickness Gaug
Rp 29.483.876
Measuring range : 0.15~20mm Display resolution : 0.001 mm and 0.01 mm selectable Sound velocity range : 1000m/s~9999m/s Power : AA batteries 1.5V(2 pcs) Operating temperature
Portable Vibration Tester
Rp 18.000.407
Features ● Fast flaw detection of motor, electric fan, pump, compressor and machine tools ● Convenient shortcut key combinations for calibration mode ● Memory of 100
Rockwell Hardness Tester
Rp 74.825.655
Operation : Menu selectable, Membrane keypad Test process : Automatic Load duration : 2-50 seconds, can be set,dynamic displayed and stored Functions : Upper /
Digital Rockwell Hardness
Rp 69.712.172
The initial test force : 98.07N (10kg); Tolerance: ± 2.0% The total test force : 588.4N(60kg), 980.7N(100kg), 1471N(150Kg); Tolerance: ± 1.0% The power
Electronic Brinell Hardne
Rp 71.813.289
Hardness value range : 8~650HB Enlargement factor of reading microscope : 20times Minimum division value of micrometer drum wheel : 0.005mm Maximum height of sample :
Digital Micro Vickers Har
Rp 88.267.303
Max height of the specimen : 100 mm Distance between the point of the indenter and the exterior panel : 98 mm Gross weight : 44kg Net weight : 30 kg Power source :
Digital Vickers Hardness
Rp 130.841.168
Carriage Control : Loading/ dwell/ uploading (automatic) Dwell Time : (0-60)s Testing Field : 1HV-2967HV Lens/Indenter switch : with Hand Turret Max. height of the specimen
Semi-automatic Grinder Po
Call
Motor Power : 550W Operation Mode : Semi-auto Rotating Speed(rpm) : 50-200 Sample Dia.(mm ) : Φ30x3 pieces,Others should be customized Pressurization : Spring Motor
Automatic Grinder Polishe
Call
Motor Voltage : 550W Operation Mode : Full-Auto Rotating Speed(rpm) : 50-200 Sample Diameter(mm ) : Φ30x6 pieces,Others can be customized Pressurization :
Ultrasonic Flaw Detector
Rp 96.092.377
Scanning range : 2.5 mm ~9999 mm Scanning resolution : 0.1mm (2.5mm ~100mm) , 1mm (100 mm ~5000mm) Gain range : 0dB ~110 dB D-delay : -20µs~+3400µs P-delay
Ultrasonic Flaw Detector
Rp 124.621.570
Scanning range : 2.5 mm ~9999 mm Scanning : 0.1mm (2.5mm ~100mm) resolution : 1mm (100 mm ~5000mm) Gain range : 0dB ~110 dB D-delay :
Ultrasonic Flaw Detector
Call
Operating temperature : -10℃~+50℃ Storage temperature : -20℃~+60℃ Language : English/Chinese/Spanish selectable Probe socket : LEMO or BNC Battery (mAh) : 2x3.7V
USB Video/Picture Capture
Rp 11.703.918
Image sensor : CMOS image sensor Resolution : 640h×480v Frame rate : 20~30fps S/N ratio : 42db Exposure : Automatic White balance : Fix Field of view(FOV) :
Valued Video Borescope TB
Rp 21.083.229
Effective pixels : 537×505(NTSC)/628×582(PAL) Resolution : 640×480 Display : 3.5”TFT-LCD Interface : Mini USB 1.1/AV out Power supply :
Rebar Locator TC100/110
Rp 54.428.892
Rebar diameter measuring range : Ø6mm- Ø50mm Display : Large graphic display with backlight Operating temperature : -10℃~40℃ Relative humidity :
Crack Depth Gauge TC200
Rp 59.957.734
Testing range : 4mm~500mm Memory : 25000 test data Power : AA batteries (LR6) x 6 Display : Large graphic display Operating temperature : -10℃~40℃ Humidity :
Concrete Thickness Gauge
Rp 54.428.892
Measuring range : 40-820mm Memory : 32000 test data and 4000 components Power : AA batteries (LR6) x 6 Display : Large graphic display Operating temperature :
Color Difference Meter TC
Rp 27.717.441
Measuring time : About 2 seconds Measuring interval : About 2 seconds Measuring aperture : Ф8mm Automatic shutdown : Automatic shutdown after 5 minutes waiting Memory : Keep
Spectrophotometer TCR300
Call
Size of integrating sphere : Φ40mm, diffused reflection surface coating Illumination Light source : CLEDs(entire wavelength balanced LED light source) Sensor : dual
Single Gloss Meter HP-300
Rp 16.014.986
Deviation (GU) : 0.2 Working temp : 10℃~40℃ Storage temp : -10℃~70℃ Humidity : Less than 85%, non-condensing Power : 4AAA alkaline battery (optional) Dimension (mm) :
Hydraulic Universal Testi
Rp 647.346.700
Test force indication relative error : 1 % of the indicated value Test force measurement range : 2%~100% of the maximum test force Constant velocity stress control range (N/mm 2
Hydraulic Universal Testi
Rp 928.747.412
Test force indication relative error : 1 % of the indicated value Test force measurement range : 2%~100% of the maximum test force Constant velocity stress control range (N/mm 2
Hydraulic Universal Testi
Rp 553.002.450
Maximum test force ( kN ) : 300 Test machine accuracy : Level 1 Test force measurement range ( kN ) : 12-300( 4 % -100 % F N ) Test force indication relative error :
Hydraulic Universal Testi
Rp 590.295.000
Maximum test force ( kN ) : 300 Test machine accuracy : Level 1 Test force measurement range ( kN ) : 24-600( 4 % -100 % F N ) Test force indication relative error :
Hydraulic Universal Testi
Rp 818.372.106
Maximum test force ( kN ) : 300 Test machine accuracy : Level 1 Test force measurement range ( kN ) : 20-1000( 2 % -100 % F N ) Test force indication relative error :
Hydraulic Universal Testi
Call
Tester level : Level 0.5 Maximum test force (kN) : 600 Test force measurement range (kN) : 6 to 600 Test force indication accuracy : Within ± 0.5% of
Hydraulic Universal Testi
Rp 2.147.483.647
Tester level : Level 0.5 Maximum test force (kN) : 1000 Test force measurement range (kN) : 10 to 1000 Test force indication accuracy : Within ± 0.5% of
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 Four column spacing
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 , Φ 42 , Φ 48 Four column
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 , Φ 42 , Φ 48 , Φ
Hydraulic Universal Testi
Call
Maximum test force kN : 1,000 Test force accuracy : ± 1% Test force measurement range : 2%~100% of the maximum test force is not classified Stretching :
Hydraulic Universal Testi
Call
Maximum test force kN : 2000 Test force accuracy : ± 1%/ ± 0.5%/ Piston stroke (mm) : 250 Test force measurement range : 2%~100% of the maximum
Hydraulic Universal Testi
Call
Maximum test force kN : 3000 Test force accuracy : ± 1%/ ± 0.5%/ Piston stroke (mm) : 250 Test force measurement range : 2%~100% of the maximum
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 Four column spacing (length ×
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 , Φ 42 , Φ 48 Four column
Hydraulic Universal Testi
Call
Mineral chain clamping diameter series ( mm ) : Φ 22 , Φ 24 , Φ 26 , Φ 30 , Φ 34 , Φ 38 , Φ 42 , Φ 48 , Φ
Electronic Universal Test
Rp 250.883.529
Test force maximum : 5kN Test force measurement range : Maximum test force ( 0.4% to 100% ) Test force resolving power : ±200000 yards Deformation extensometer :
Electronic Universal Test
Call
Test force resolution : ±300000 yards Maximum deformation : 10mm Deformation measurement range : Extensometer 0.2%-100% of full scale Displacement resolution :
WDW-100E Microcomputer Co
Rp 498.496.171
Maximum test force: 100KN Test force accuracy Accuracy: better than ± indicated value . 1% / ± 0.5% (precision of ± 0.5%
Electronic Universal Test
Rp 722.024.295
Features : Imported servo system and servo motor, all-digital measurement control system Maximum test force ( kN ) : 200 Host stiffness ( kN/mm ) : 400 Precision ball screw
Electronic Universal Test
Rp 618.156.433
Features : Imported servo system and servo motor, all-digital measurement control system Maximum test force ( kN ) : 300 Host stiffness ( kN/mm ) : 400 Precision ball screw
Electronic Universal Test
Call
Maximum test force: 100KN Test force accuracy Accuracy: better than ± indicated value . 1% / ± 0.5% (precision of ±
Electronic Universal Test
Rp 1.585.742.199
Features : Imported servo system and servo motor, all-digital measurement control system Maximum test force ( kN ) : 500 Host stiffness ( kN/mm ) : 1,000 Precision ball screw
Electronic Universal Test
Rp 1.381.995.000
Features : Imported servo system and servo motor, all-digital measurement control system Maximum test force ( kN ) : 600 Host stiffness ( kN/mm ) : 1,000 Precision ball screw
WDW-2 Single Column Deskt
Call
Maximum test force : 2kN Measuring range: 20N to 2kN Display relative error : ± 0.5% Relative resolution : 0.25% Tester level : Level 0.5 Range :
Pressure Testing Machine
Rp 228.841.199
Maximum test force ( kN ) : 300 Test force measurement range : 4%-100% of the maximum test force Test force indication relative error : ≤1 % of the indicated value Upper
Pressure Testing Machine
Call
Maximum test force ( KN ) : 300 Test force measuring range : 4%-100% (12kn-300KN) Test force indication relative error : ≤± 1% Compressed space ( mm ) :
Pressure Testing Machine
Call
Maximum test force ( KN ) : 600 Test force measuring range : 4%-100% (24kn-600KN) Test force indication relative error : ± 1% Compressed space ( mm ) :
Pressure Testing Machine
Rp 365.000.000
Maximum test force ( KN ) : 1000 Test force measuring range : 4%-100% (40kn-300KN) Test force indication relative error : ± 1% Compressed space ( mm ) :
Pressure Testing Machine
Rp 454.488.000
Maximum test force ( kN ) : 2000 Test force measurement range : 4%-100% of the maximum test force Test force indication relative error : ≤1 % of the indicated
Pressure Testing Machine
Call
Column spacing ( mm ) : 378mm × 328mm/ 460mm×410mm Displacement speed of piston ( mm/min ) : ≥ 50mm/min Pump motor power ( kW ) : 5.5 Main frame size
Pressure Testing Machine
Call
Column spacing ( mm ) : 378mm × 328mm/ 460mm×410mm Displacement speed of piston ( mm/min ) : ≥ 50mm/min Pump motor power ( kW ) : 5.5 Main frame size
Pressure Testing Machine
Call
Maximum test force ( kN ) : 2000 Test force measurement range : 4%-100% of the maximum test force Test force indication relative error : ≤1 % of the indicated
Pressure Testing Machine
Call
Maximum test force ( KN ) : 15000 Test force indication relative error : ± 1% of indication Test force measuring range : 2%-100 Persent FN Compressed space ( mm ) :
Pressure Testing Machine
Call
Maximum test force ( KN ) : 20000 Test force indication relative error : ± 1% of indication Test force measuring range : 2%-100 Persent FN Compressed space ( mm ) :
Pressure Testing Machine
Call
Maximum test force ( KN ) : 30000 Test force indication relative error : ± 1% of indication Test force measuring range : 2%-100 Persent FN Compressed space ( mm ) :
Pressure Shear Tester YAW
Call
Maximum test force ( KN ) : 5000 Test force indication relative error : ± 1% of indication Test force measuring range : 1%-100 FN Compressed space ( mm ) :
Pressure Shear Tester YAW
Call
Maximum test force ( KN ) : 10000 Test force indication relative error : ± 1% of indication Test force measuring range : 1%-100 FN Compressed space ( mm ) :
Pressure Shear Tester YAW
Call
Maximum test force ( KN ) : 15000 Test force indication relative error : ± 1% of indication Test force measuring range : 1%-100 FN Compressed space ( mm ) :
Pressure Shear Tester YAW
Call
Maximum test force ( KN ) : 20000 Test force indication relative error : ± 1% of indication Test force measuring range : 1%-100 FN Compressed space ( mm ) :
Pressure Shear Tester YAW
Call
Maximum test force ( KN ) : 30000 Test force indication relative error : ± 1% of indication Test force measuring range : 1%-100 FN Compressed space ( mm ) :
MR-S10B Four Ball Frictio
Rp 727.350.973
Test force range ( N ) : 40 to 10000 Friction measurement range (N): 0~300 Spindle speed range (r/min) : 200 to 2000 Spindle speed error ( r/min) : ±10 Heater
MR-S10G Lever Four Ball F
Rp 528.247.061
Test force loading method: Manual loading of weights Maximum friction: 200N Relative error of friction indication should not be greater than: ±3% Temperature control
MPV-20B Screen Display PV
Call
Maximum Test Force: 20kN 2.2 Test Force Accuracy: ± 1% 2.3 Spindle speed range: 200r/min to 2800 r/min 2.4 Spindle Speed Control Accuracy: ± 10
MM-W1A Vertical Universal
Call
Maximum test force ( kN ) : 1 Test force measurement range : 0.4%-100% of the maximum test force Errors below 200N (N) : ≤ ±2 Relative error of indication
MM-W1B Vertical Universal
Call
Maximum test force: 1kN Test force working range: 0.4% ~ 100% of maximum test force The relative error of the test force indication is not greater than : ± 1% , the
MM-U10 Screen Display Mat
Call
(1) Maximum test force: 10kN ; (2) Accuracy of test force indication: ± 1% (3) Spindle speed range: 100~2800r/min , stepless speed regulation; (4) Spindle speed
MM-U5G (10G) Screen Displ
Call
Test force accuracy : ±1% Spindle speed range (r/min) : 100 to 2800 (steplessly adjustable) Rotation measurement accuracy : ±10 r/min Maximum friction :
MR-H5A Ring Block Wear Te
Call
◆ Maximum test force: 5000N ◆ spindle speed range: 100 ~ 1500r/min stepless adjustable ◆ Test force ratio: 10:1 ◆ Friction rod scale: 0.5N/100mm ◆ Test oil
MR-H5B Ring Block Abrasio
Call
Maximum test force ( kN) : 5 Spindle speed range (r/min) : 0-1500 Spindle speed error (r/min) : 100 r/min or more does not exceed ±5 Test oil temperature range
MR-H3A High Speed R
Call
Maximum test force (N) : 3000 Test force maintains maximum allowable change : ± 1% of maximum test force Maximum friction (N) : 300 Spindle speed range (r/min) :
MM-P2 Screen Display Wear
Call
1 ) Maximum Test Force (N ): 2000 2 ) Relative error of test force indication: ± 2% 3 ) Measure the maximum frictional torque ( N·m) : 15 4) Frictional
MM-P05 High Speed Disk Pi
Call
(1) Spindle speed: 200r/min~12000r/min , stepless frequency control; When the speed is lower than 1000r/min , the control accuracy is ± 10r/min
MR-S10D Electro-Hydraulic
Call
Test force range ( N ) : 40 to 10000 Friction measurement range (N) : 0~300 Spindle speed range (r/min) : 200 to 2000 Spindle speed error ( r/min) : ±10 Heater
LW-300 Horizontal Tensile
Call
Maximum test force ( KN ) : 300 Test force indication relative error : ± 1% of indication Stretching space ( mm ) : 1000 , 5000 , 10000 , 30000 customized according
LW-600 Horizontal Tensile
Call
Maximum test force ( KN ) : 600 Test force indication relative error : ± 1% of indication Stretching space ( mm ) : 1000 , 5000 , 10000 , 30000 customized according
LW-1000 Horizontal Tensil
Call
Maximum test force ( KN ) : 1,000 Test force indication relative error : ± 1% of indication Stretching space ( mm ) : 1000 , 5000 , 10000 , 30000 customized according
LW-3000 Horizontal Tensil
Call
Maximum test force ( KN ) : 3000 Test force indication relative error : ± 1% of indication Stretching space ( mm ) : 1000 , 5000 , 10000 , 30000 customized according
PLS-1000 Multi-Fluid Liqu
Call
Standard amplitude (mm) : ±75 Test force : Better than ±1% of indication Amplitude : Better than the indicated ± 1% FS Frequency range (Hz) :
PMS-500 Digital Hydraulic
Call
Maximum test force ( KN ) : 500 Frequency range ( Hz ) : 2-8 Maximum pulsation volume ( ml/ times) : 400 Counter : Cumulative operation 100 times 1 word Actuator
PMS-1000 Digital Hydrauli
Call
Maximum test force ( KN ) : 1000 Frequency range ( Hz ) : 2-8 Maximum pulsation volume ( ml/ times) : 800 Counter : Cumulative operation 100 times 1 word Actuator
PLS series electro-hydrau
Call
Standard amplitude (mm) : ±75 Test force : Better than ±1% of indication Amplitude : Better than the indicated ± 1% FS Frequency range (Hz) :
PMS-500 Digital Hydraulic
Call
Maximum test force ( KN ) : 500 Frequency range ( Hz ) : 2-8 Maximum pulsation volume ( ml/ times) : 400 Counter : Cumulative operation 100 times 1 word Actuator
PMS-1000 Digital Hydrauli
Call
Maximum test force ( KN ) : 1000 Frequency range ( Hz ) : 2-8 Maximum pulsation volume ( ml/ times) : 800 Counter : Cumulative operation 100 times 1 word Actuator
PWS-E1000 Electro-Hydraul
Call
Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1 (precision ±0.5 ) Deformation : Better
PWS-E100 Electro-Hydrauli
Call
Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS (precision ±0.5% FS ) Deformation :
PWS-E20/25 Electro-Hydrau
Call
Static : 25 Dynamic : ±25 Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS (precision
PWS-E5 Electro-Hydraulic
Call
Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS (precision ±0.5% FS ) Deformation :
PWS-E500 Electro-Hydrauli
Call
Static : 500 Dynamic : ±500 Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS
PWS-E50 Electro-Hydraulic
Call
Static : 50 Dynamic : ±50 Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS (precision
Shield Segment Mechanical
Call
1. the number of loading cylinder: 36 . 2. The maximum test force of a single cylinder: thrust 2000kN , test force accuracy 1%, resolution 1kN. 3. cylinder piston stroke: 500mm
PWS-E250 Electro-Hydrauli
Call
Static : 250 Dynamic : ±250 Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS
PWS-E2500 Electro-Hydraul
Call
Static : 2500 Dynamic : ±2500 Test force : Better than ±1% of indication (precision ±0.5% ) Displacement : Better than ±1% FS
MGW-5000 Anchor Tester
Call
Maximum test force ( KN ) : 5000 Test force indication relative error : ± 1% of indication Test force measuring range 2%-100% FN Stretching distance ( mm ) :
LWW-2000 Microcomputer Co
Call
Maximum vertical bending pressure kN : 2000 Maximum horizontal pressure kN : 1000 Support distance mm : 50~500 Roller diameter mm : Φ 100 Roller length mm :
Microcomputer Control Spr
Rp 227.048.250
Maximum test force: 50N, 100N, 200N, 500N, 1000N, 2000N Test force minimum reading: 0.05% of full scale per gear Displacement minimum
Microcomputer Controlled
Call
Maximum test force axial transverse : 300kN 20kN Test force effective measurement range : 1%-100% Test force minimum reading axial transverse : 0.01kN
Spring Load Automatic Sor
Call
◇ Sorting springs 1200 to 2,000 pieces / hour (according to spring conditions) ◇ Spring
Digital impact testing ma
Rp 157.499.000
Pendulum advance angle: 150° The distance from the center of the pendulum shaft to the strike center: 750mm Impact speed: 5.2m/s Sample holder span: 40mm Sample
Impact Tester JB-800
Call
Pendulum advance angle: 150° Impact speed: 5.9m/s Maximum impact energy: 800J Sample holder span: 40mm Sample bearing end arc radius: R1-1.5mm Impact knife arc
Impact Sample Cryogenic T
Call
Power supply: AC380V 50Hz three-phase four-wire system, power 2.2KW Temperature range: Room temperature to -60°C (water temperature not higher than 15°C, room
Impact Specimen Notch Pro
Rp 66.302.149
Projection screen diameter: 180mm Working desk size: Square table size: 110×125mm Round table diameter: 90mm Workbench glass diameter:
JB-300C, 500C Semi-Automa
Call
The maximum impact energy: 300J Dial scale range and division value: 300J level 2J Pendulum lifting angle: 150° Pendulum Center to Impact Point (Test Center) Distance:
Digital Low Load Brinell
Call
Model : THBP-62.5 Test force : 5kg , 6.25kg , 10kg , 15.625kg , 30kg , 31.25kg , 62.5kg 49.03N ,
HB-3000B-I Brinell Hardne
Call
Hardness measurement range : (8-650)HBW Test force : 187.5 , 250 , 750 , 1000 , 1500 , 3000kgf Test force selection : Weights Standards compliant : GB/T231.2-2009 ; ASTM
HR-150A Brinell Hardness
Call
Initial test force: 98.1N (10kgf) Total test force: a. 588.4N (60kgf) b. 980.7N (100kgf) c. 147lN (150 kgf) Rockwell hardness measurement range: 20-88HRA 20-100HRB
Surface Roughness Tester
Rp 149.742.283
Technical Specifications Assessed profile R (Roughness),W (Waveness),P (Primary profile) Measuring range ±400μm,
TIME3210 Surface Roughnes
Call
Measuring Range R a: 0.03μm?6.35μmR t: 0.2μm?25.3μmR z:
TIME3221 Surface Roughnes
Rp 41.518.155
Test Principle Inductance type Measurement Range 400μm Stylus tip Radius 5μm Stylus tip Material Diamond Measuring
TR110 Surface Roughness T
Call
Model TR110 Roughness parameter Ra, Rz Tracing length 6mm Tracing speed 1.0mm/sec Cut-off lengths 0.25mm/0.8mm/2.5mm Evaluation
TR100 Surface Roughness T
Rp 15.729.191
Model TR100 Roughness parameter Ra, Rz Tracing length 6mm Tracing speed 1.0mm/sec Cut-off lengths 0.25mm/0.8mm/2.5mm Evaluation
TIME3220 Surface Roughnes
Rp 29.483.876
Test Principle Inductance type Measurement Range 400μm Stylus tip Radius 5μm/2μm Stylus tip Material Diamond Measuring
TR220 Surface Roughness T
Call
Model No. TR220 Roughness parameters Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr, Rpc, Rk, Rpk, Rvk, Mr1, Mr2 Assessed profiles Roughness
TR300 Surface Roughness T
Call
Assessed profile R (Roughness), W (Waveness), P (Primary profile) Measuring Range ±400µm,
TR210 Surface Roughness T
Call
Model TR210 Roughness parameters Ra, Rz, Ry, Rq Assessed profiles Roughness profile (R) Unit mm, inch Display resolution 0.01
TR200 Surface Roughness T
Call
Model TR200 Roughness parameters Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr, Assessed profiles Roughness profile (R) Primary
TIME2260 Ultrasonic Thick
Call
Transducer 5MHz, Dia.12mm Zero calibration Aut Gauge calibration Calibrate the sound velocity when the thickness is knownCalibrate the thickness when the sound
TT300A Ultrasonic Thickne
Call
Model TT300A Measuring range 0.75mm-225.0mm (steel) Tolerance ±0.5% H +0.01mm Lower limits of steel pipes φ20mm x
High-end Ultrasonic Thick
Rp 49.381.649
Measuring range 0.25~500mm Display resolution 0.001 mm, 0.01 mm or 0.1 mm Sound velocity range 508 m/s?18699m/s Power AA
TT120 Ultrasonic Thicknes
Call
TT120 Measuring range 0.75 – 300.00mm (steel) Measuring range for steel
TT130 Ultrasonic Thicknes
Rp 13.062.243
TT130 Measuring range 0.75 – 300.00mm (steel) Measuring range for steel
TT300 Ultrasonic Thicknes
Rp 17.077.221
TT300 TT300A TT310 TT320 TT340 Measuring range 1.2mm-225.0mm (steel) 0.75mm-225.0mm (steel) 1.2mm-225.0mm
Vibration Tester TIME 724
Rp 58.985.491
Sensitivity of Acceleration transducer (mVrms/g) Acceleration
TV310/TV320 Vibration Tes
Call
Model TV310 TV320 Measuring range Acceleration 1m/s2~392 m/s2(Peak) 0.1m/s2~20
TV200/TV220/TV260A Vibrat
Rp 3.455.350
Model TV200 TV220 TV260A Parameters RMS of vibrationvelocity (mm/s) Displacement Acceleration, Velocity, Displacement Testing
Shore A Hardness Tester T
Rp 11.800.000
Test scale available Shore A Standards DIN 53505, ASTM D2240, ISO 7619, JIS K7215 Display Hardness result, Average value, Max value(Peak
TH210 Shore Durometer
Rp 12.766.357
Test scale available Shore D Standards DIN53505, ASTMD2240, ISO 7619, JIS K7215 Display Hardness result, Average
Holiday Detector DJ SERIE
Rp 23.108.488
Model DJ-6(A) DJ-6(B) DJ-9 Thicknessdetection 0.03-1mm 0.05-10mm Output voltage 0.6KV-8KV 0.6KV-35KV